do it yourself, diy, articles and information, how to
Search:  
Working Your Way with Vinyl Fascia Boards - Read the following do it yourself/diy article to discover more about Working Your Way with Vinyl Fascia Boards and more about Home Improvement. - Information and article directory provided by S&S Designed Landscaping and The Landscape Design Site.

Home | Home Improvement


Working Your Way with Vinyl Fascia Boards

Vinyl fascia boards are perfect when it comes to protecting your home against water damage. Know more about them in this article.

There are a variety of fascia boards available, and one of the most effective is the vinyl ones. This is because these fascia boards can actually offer good amount of protection to your roof and even your home from too much water damage.

Things You Need to Know about Vinyl Fascia Boards

1. Both the fascia boards and the soffit can share the same look. If you are working with vinyl fascia boards, it would also be a great idea if the soffit is also made of vinyl. You can have them vented or not; it clearly depends on your preference. But if you want to improve better air circulation, you may want to go for the former.

2. Nails should go through the soffit and into the vinyl fascia board. Perhaps you are accustomed to adding a nail directly into any face of a surface. When it comes to vinyl fascia board, it is always recommended to have it the other way around. It should pass from the soffit and into the sub-fascia. You can then attach the top portion of your vinyl fascia board into the drip edge.

3. The soffit comes first before the gutter or the fascia. When you are working with vinyl fascia boards, the logical sequence is soffit first, then the fascia, and, lastly, the gutter. You can always try to improvise, but sticking to what works will save you a lot of headache later on.

Installing the Vinyl Fascia Board

1. Ready the tools that you need for the installation. Obviously, you cannot do anything if you do not have the right tools with you. These can include screws, a cutting tool for your vinyl fascia board, as well as a tape measure.

2. Prepare the scaffolding. Generally, you can use the ladder. But if you are thinking about overall safety, the scaffolding is definitely a much better choice. It can provide you the balance that you need, particularly when you are going to spend a good amount of time near your roof.

3. Have a friend with you when you are installing. Do not think that a vinyl fascia board is going to be a lightweight material. It’s something that you can handle, but having someone to help you out will always make the load a lot lighter. You also need a partner to hold the other end of the vinyl fascia boards once you’re ready to attach it to your home. Besides, he/she can remove the dullness of being all alone up there.

4. Use screws rather than nails. The former appears a lot cleaner to use to your vinyl fascia boards. They can also fasten the fascia boards more firmly into your soffit and into your roof. What’s more, nails tend to rust faster than screws. Nevertheless, just to make sure that you can completely attach the vinyl board, you and your partner must push the boards against the house. One must start adding the screws, whilst the other will hold the board firmly for him.

This Article Was Written By: DanPartridge

For the most comprehensive choices of vinyl fascia boards, shop and compare at Euro Trims.

Article Source: http://www.the-landscape-design-site.com/diy

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Home Improvement Articles Via RSS!

Free Landscaping Ideas  Free Landscaping Pictures Directory  Pictures Of Backyard Landscaping  
Buy Landscape Fabric  Backyard Landscaping Ideas  Front Yard Landscaping Ideas  Landscaping Plan  Landscaping Plans  Lawn Care

Powered by Article Dashboard